New to the forum

Build logs from members building catamarans, trimarans and other multi-hull variants.
Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

New to the forum

Post by Jimbo » Thu Feb 25, 2016 1:46 pm

I was speaking to Romeo in Carnarvon yesterday about going to see him before he gets to launching. He said to go onto this forum to have a look at some of his photos. I started building my (Sarah) in April of 2013 and have only just turned my second hull (few issues along the way). I am impressed by the range of topics and the knowledge base of the forum and so I have joined the conversation. Currently building my Bridgedeck on the floor as per Romeo.
Jimbo
PurrPullHaze (Sarah #33)

44c
Posts: 1148
Joined: Tue Aug 08, 2006 5:08 am
Location: Hervey Bay, Qld

Re: New to the forum

Post by 44c » Thu Feb 25, 2016 4:27 pm

Welcome Jimbo! A few Sarah's being launched these days. Good looking boats. Some pics of yours would be great!

Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

Re: New to the forum

Post by Jimbo » Thu Feb 25, 2016 10:55 pm

Will do as soon as I get familiar with the downloading arrangements.
Jim
PurrPullHaze (Sarah #33)

Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

Re: New to the forum

Post by Jimbo » Mon Feb 29, 2016 5:57 pm

IMG_0898.JPG
Turning 1st hull
IMG_0892.JPG
These are a couple of the photos when we turned the 1st hull I will put the 2nd hull turning in next post.
PurrPullHaze (Sarah #33)

sea_bee
Posts: 107
Joined: Sat Jul 09, 2011 6:09 pm
Location: Pillar Valley NSW

Re: New to the forum

Post by sea_bee » Mon Feb 29, 2016 7:53 pm

This is curious, Jimbo. I just saw your signature says you are building #33. I went and checked my plans, and they are numbered "33" too!

Chris

Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

Re: New to the forum

Post by Jimbo » Mon Feb 29, 2016 8:48 pm

Hi Chris

I thought I saw #33 next to a post when I first looked at the forum. My plans definitely say #33 and I bought mine in December of 2012.

Jim
PurrPullHaze (Sarah #33)

Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

Re: New to the forum

Post by Jimbo » Tue Mar 01, 2016 3:31 pm

Hi Chris

I see you have been a member of the forum prior to my plans being purchased I wonder if Peter has forgotten to change me to 34.

Its a bit late now I think to worry about buy I will give him a call.

Regards

Jimbo
PurrPullHaze (Sarah #33)

sea_bee
Posts: 107
Joined: Sat Jul 09, 2011 6:09 pm
Location: Pillar Valley NSW

Re: New to the forum

Post by sea_bee » Wed Mar 02, 2016 9:21 pm

This is odd. We'd better check with Peter.
Image

Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

Re: New to the forum

Post by Jimbo » Thu Mar 03, 2016 2:27 pm

Hi Chris
I have attached the front of my plan for you to see.
Regards
Jimbo
Attachments
plan no..pdf
(701.87 KiB) Downloaded 358 times
PurrPullHaze (Sarah #33)

Jimbo
Posts: 26
Joined: Wed Feb 24, 2016 10:18 pm
Location: Stratham WA

Re: New to the forum

Post by Jimbo » Thu Mar 03, 2016 2:38 pm

Hi Chris

I have just spoken to Peter he said someone had already told him about the numbers.
He said it was when they changed over computers there was a mix up.
I told him I am happy to be 33 & 1/3 like the speed for an LP record if that helps.
As far as he is concerned there are no other issues with us both having the same number on our plans as we have both paid for our license to build.
He did suggest A & B but like I said 33 & 1/3 suits me.
Regards

Jimbo
PurrPullHaze (Sarah #33)

Post Reply