Hi builders, we are just filling out our first registration papers for our Easy 37, there is a question. What is the passenger capacity? Does anyone know? Peter Snells phone is not on
Cheers
Terryk
passenger capacity
Re: passenger capacity
Hi builders, I found this formula which seems to work even though it is for a mono hull.
For boats over 10 metres in length, use the appropriate formula below to calculate the number of adults you can safely carry in calm water conditions.
For singledeck boats (no flybridge) the formula is:
•maximum capacity (adults) = 0.75L√B (nearest whole number)
where L = length of boat in metres and B = breadth of boat in metres.
Ours worked out to 16.9 people.
cheers
terryk
For boats over 10 metres in length, use the appropriate formula below to calculate the number of adults you can safely carry in calm water conditions.
For singledeck boats (no flybridge) the formula is:
•maximum capacity (adults) = 0.75L√B (nearest whole number)
where L = length of boat in metres and B = breadth of boat in metres.
Ours worked out to 16.9 people.
cheers
terryk
Re: passenger capacity
Thanks for the info.
However I must be reading the formula incorrectly (math was never my strong point).
length in metres x .75 then divide by the beam in metres?
Doesn't work out for me as I only get 1.2 (12 x .75 / 7.5)
David
However I must be reading the formula incorrectly (math was never my strong point).
length in metres x .75 then divide by the beam in metres?
Doesn't work out for me as I only get 1.2 (12 x .75 / 7.5)
David
Re: passenger capacity
Hi David
There is a square root sign in Terry's formula.
Take three quarters of the length and divide by the square root of the beam. If yours was 12.0L and 7.5B then it works out at 24.6 people. I get over 22 people for Snell's Sarah; clearly more than I would ever want on board, even for something like a NYE party on Sydney Harbour.
Chris
There is a square root sign in Terry's formula.
Take three quarters of the length and divide by the square root of the beam. If yours was 12.0L and 7.5B then it works out at 24.6 people. I get over 22 people for Snell's Sarah; clearly more than I would ever want on board, even for something like a NYE party on Sydney Harbour.
Chris
Re: passenger capacity
Woops  so it is. Thanks Chris.
But 24.6 people? The bridgedeck clearance would resemble the earlier Prout designs.
I understand that the formula is based on an average of 75kg per person. Based on what I see walking the streets, that average is a tad low.
My design's sales pitch allowed for a load carrying capacity of 2 tonne. Deduct say 600kg for water and fuel (it's actually more than that fully filled) leaves 1400kg. Divide by 75kg means a capacity of 18.6 passengers. Still too many in my books to be considered good seamanship.
But 24.6 people? The bridgedeck clearance would resemble the earlier Prout designs.
I understand that the formula is based on an average of 75kg per person. Based on what I see walking the streets, that average is a tad low.
My design's sales pitch allowed for a load carrying capacity of 2 tonne. Deduct say 600kg for water and fuel (it's actually more than that fully filled) leaves 1400kg. Divide by 75kg means a capacity of 18.6 passengers. Still too many in my books to be considered good seamanship.

 Posts: 755
 Joined: Thu May 04, 2006 7:36 pm
 Location: Brisbane Australia
 Contact:
Re: passenger capacity
Have a good read of the Regs. You may find that capacity plates (I am talking specifically about displaying an actual 'capacity plate') does not apply to your homebuild. I am happy to be corrected, but capacity plates only came in in 2003 (in Australia) I think, and the rule applied to factory built vessels to prevent commercial overloading.
James
______________________________________________
https://www.diycatamaran.com
https://www.youtube.com/user/puremajek
_____________________________________________
______________________________________________
https://www.diycatamaran.com
https://www.youtube.com/user/puremajek
_____________________________________________
Re: passenger capacity
Remember these capacities refer to CALM water. They're not what you would take out to sea.
The allowable passenger capacities are pretty amazing. There was a Seawind 1000 operating as a whale watching boat in Hervey bay that from memory, was allowed about 30 people!
The allowable passenger capacities are pretty amazing. There was a Seawind 1000 operating as a whale watching boat in Hervey bay that from memory, was allowed about 30 people!