easy37 frame 9 bulkhead

Some quick ideas, fixes, resins and joinery hints and building tips
Post Reply
terryk
Posts: 320
Joined: Wed Jan 10, 2007 10:37 pm
Location: Gosford

easy37 frame 9 bulkhead

Post by terryk » Thu Nov 05, 2009 11:50 pm

Hi builders, just a note about the bulfhead on frame 9, when assembling F9 bulkhead be sure to add 12mm to the height above the sheer for the bridgedeck. Bulkhead F9 is the only not built on top of you existing 12mm bridgedeck/outboard pod. If you don`t do this then the bridgedeck will butt up to the face of the bulkhead and not come up from underneath.

cheers

terryk
Top
Post Reply

Return to “Building, Timber and Joinery”